Oregon Concrete Calculator
✓ 100% Free
Oregon
Concrete Calculator — Yards, Bags & Cost
Calculate cubic yards, bags needed, and Oregon-accurate ready-mix costs for any concrete project — driveways, patios, foundations, retaining walls, garage floors & more.
$155
Avg OR Ready-Mix (per Cu Yd)
3,500
Min PSI — OR W. Residential Flatwork
24 in
Max Frost Depth — E. Oregon
OSSC
OR Structural Specialty Code
🚗 Driveway
🏡 Patio
🏗️ Foundation
🧱 Retaining Wall
🏢 Garage Floor
🛤️ Sidewalk
The Oregon Concrete Calculator helps homeowners, contractors, and builders estimate cubic yards, bag count, and ready-mix costs for any concrete project across Oregon. OR pricing runs $142–$178/yd — above the national average — reflecting high labor costs, strict environmental permitting, and Portland metro demand. Oregon’s split climate means western OR (Portland, Eugene, Salem) has mild, wet winters with minimal freeze-thaw, while eastern OR (Bend, Medford highlands, La Grande) can hit hard freezes requiring air-entrained mixes. Enter your dimensions and get instant, Oregon-accurate results.
🌲 Oregon Concrete Calculator
🌲 OR-Accurate Pricing · OSSC/ORSC Compliant · Oregon State
Oregon Concrete Calculator
Cubic yards, bags needed & OR ready-mix cost — instant results
🚗 Driveway
🏡 Patio
🏗️ Foundation
🧱 Retaining Wall
🏢 Garage
Enter project dimensions to calculate volume, bags, and estimated Oregon material cost.
Oregon building permits required for structural concrete. Apply through Oregon’s Building Codes Division or your local city/county permit office.
Patio 4 in · Driveway 5–6 in · Garage 4–6 in · Foundation 8–12 in · Retaining wall 8–12 in
Cubic Yards Required
—
Including waste factor
📋 Project Summary
💵 OR Cost Estimate
📐 Oregon Slab Cross-Section — OSSC Standard Layers
Broom / Brushed Finish — Oregon Standard
Concrete — 4 in. Min (ORSC Residential)
3,500 PSI W. OR · 4,000 PSI E. OR · W/C Ratio ≤ 0.50
⬛ Rebar / Wire Mesh — Driveways, Retaining Walls, Structural Work
🪨 4 in. Compacted Gravel Base (Oregon Drainage Standard)
Compacted Subgrade — Below 12–24 in. Frost Line (Region Dependent)
27
Cu ft per cubic yard
45
80 lb bags per cu yd
$155
Avg OR ready-mix / yd
Concrete Slab
Rebar Layer
Gravel Base
Subgrade
Oregon Concrete Calculator — What You Need to Know
Oregon’s concrete requirements are shaped by its dramatically different regional climates. Western Oregon (Portland, Eugene, Salem, the Coast) receives heavy rainfall but rarely freezes hard — making drainage, proper grading, and surface sealing more important than freeze-thaw protection. Eastern Oregon (Bend, La Grande, Klamath Falls, Baker City) sees genuine winters with frost depths up to 24 in., requiring 4,000 PSI air-entrained mixes for all outdoor flatwork. The Oregon Structural Specialty Code (OSSC) and Oregon Residential Specialty Code (ORSC) govern all concrete work, and Portland metro projects also face Bureau of Development Services permitting requirements.
🔵 OSSC / ORSC Minimum Concrete Requirements
Western OR outdoor flatwork: 3,500 PSI min · Eastern OR (freeze-thaw): 4,000 PSI + 3.5–6% air entrainment · Foundations: 3,000–4,000 PSI · Retaining walls: 4,000–4,500 PSI · W/C ratio: max 0.50 for exposed flatwork. Verify requirements with the Oregon Building Codes Division.
🚗 Oregon Residential Driveway
A standard 10×20 ft driveway at 5 in. needs ~3.1 cubic yards. At Portland/Eugene pricing ($150–$172/yd for 3,500 PSI), material costs $465–$533. Western OR driveways should be sloped for drainage (1–2%) to prevent the standing water that causes surface scaling in Oregon’s wet winters.
🧱 Oregon Retaining Wall
Retaining walls are extremely common in Oregon’s hilly terrain — Portland, Eugene, and Ashland hillsides all see heavy demand. A 4 ft tall × 20 ft long × 12 in. thick wall needs ~3.0 cubic yards of 4,000–4,500 PSI concrete. Oregon requires permits for retaining walls over 4 ft from bottom of footing to top of wall.
🏗️ OR Foundation / Basement
Western OR homes often use crawl spaces; eastern OR and mountain communities use full basements. A standard 1,200 sq ft foundation needs 18–26 cubic yards. Portland metro requires seismic reinforcement in foundations — Oregon is in a moderate-to-high seismic zone. OSSC permit and licensed contractor required statewide.
How to Calculate Concrete Volume — Oregon
Multiply length × width × (depth in inches ÷ 12) to get cubic feet, then divide by 27 for cubic yards. For Oregon hillside retaining walls, calculate length × height × thickness, then divide by 27. Always add a minimum 10% waste factor — Oregon’s short-load fees of $125–$225 at most Portland, Eugene, and Bend plants make a second delivery far more expensive than over-ordering slightly.
📐 Oregon Concrete Formula
Volume (cu ft) = Length (ft) × Width (ft) × [Depth (in) ÷ 12]
Volume (cu yd) = Volume (cu ft) ÷ 27
Order Qty = CEIL[ Volume (cu yd) × Waste Factor ]
Example: 20 ft × 10 ft OR driveway × 5 in = 83.3 cu ft = 3.09 cu yd → Order 3.4 cu yd
⚠️ Western Oregon Wet Weather Pour Warning
Portland, Eugene, and the Oregon Coast average 37–60 inches of rain per year. Never pour concrete on wet or saturated subgrade — water in the base causes settlement and cracking within months. Check the 48-hour forecast carefully; rain on freshly poured concrete before it sets can wash away surface cement and weaken the top layer permanently. In winter (Nov–Mar), most OR contractors avoid outdoor pours entirely and use plastic sheeting or temporary shelters when scheduling is unavoidable.
Oregon Concrete Calculator — Pricing Reference
Oregon ready-mix pricing is above the national average, driven by high Portland metro labor rates, strict environmental compliance costs, and the state’s progressive prevailing wage rules on public projects. Portland and Eugene have the most competitive supplier markets. Bend and central Oregon run $15–$25/yd higher due to geography and fewer competing plants. Compare with the Washington Concrete Calculator for Pacific Northwest neighbor pricing.
| Mix Type / PSI | OR Price / Cu Yd | National Avg | Best For | Air Entrained? | OR Code |
|---|---|---|---|---|---|
| 3,000 PSI — Standard | $142–$160 | $130–$150 | Interior slabs, crawl space floors | Not Outdoor | Interior Only |
| 3,500 PSI — W. OR Standard | $150–$168 | $138–$158 | W. OR driveways, patios, sidewalks | W. OR Optional | Compliant |
| 4,000 PSI — E. Oregon | $158–$178 | $145–$165 | E. OR freeze-thaw, all retaining walls | E. OR Required | Compliant |
| 4,500 PSI — Structural | $168–$192 | $155–$175 | Foundations, retaining walls, heavy slabs | E. OR Required | Compliant |
| 5,000 PSI — High Strength | $180–$210 | $163–$185 | Commercial / seismic structural | Required | Compliant |
| Fiber / Stamped Decorative | $185–$240 | $155–$210 | Portland patios, pool decks, decorative | OR Optional | Compliant |
3,000 PSI — Standard
OR Price / Cu Yd$142–$160
National Avg$130–$150
Best ForInterior / crawl space slabs
3,500 PSI — W. OR Standard
OR Price / Cu Yd$150–$168
National Avg$138–$158
Best ForW. OR driveways, patios, sidewalks
4,000 PSI — E. Oregon
OR Price / Cu Yd$158–$178
National Avg$145–$165
Best ForE. OR freeze-thaw, retaining walls
4,500 PSI — Structural
OR Price / Cu Yd$168–$192
National Avg$155–$175
Best ForFoundations, retaining walls
5,000 PSI — High Strength
OR Price / Cu Yd$180–$210
National Avg$163–$185
Best ForCommercial / seismic structural
Oregon Concrete Project Tips
- Western OR: drainage is your #1 priority — Portland, Eugene, and the Coast receive 37–60 in. of rain per year. Slope all flatwork 1–2% away from structures, install a 4 in. gravel base for drainage, and seal driveways and patios every 3–5 years to prevent surface erosion and scaling.
- Eastern OR: specify air-entrained mix — Bend, La Grande, Klamath Falls, and Baker City experience genuine winter freeze-thaw cycles. Specify 4,000 PSI with 3.5–6% air entrainment for all outdoor flatwork east of the Cascades.
- Avoid wet weather pours (Nov–Mar) — Western Oregon’s rainy season makes outdoor concrete work risky from November through March. Rain on uncured concrete washes out surface cement. Schedule pours during the dry season (June–September) whenever possible.
- Portland metro: seismic reinforcement required — Oregon’s Willamette Valley sits in a moderate seismic zone with Cascadia Subduction Zone risk. All structural foundations in Portland, Salem, and Eugene should include OSSC-compliant seismic rebar detailing — verify with your licensed Oregon engineer.
- Retaining walls over 4 ft need a permit — Oregon requires a building permit for retaining walls exceeding 4 ft from the bottom of footing to the top. Hillside Portland and Eugene projects almost always require engineered drawings and inspections. Use 4,000–4,500 PSI with rebar on all retaining walls.
- Order 10–15% extra for hillside sites — Oregon hillside driveways and retaining wall pours often have difficult truck access. Short-load fees of $125–$225 at Portland and Bend plants make over-ordering the safer and cheaper choice.
- Cure for 7 days minimum in cool OR weather — Oregon’s mild but cool temperatures (50–65°F in spring/fall) slow concrete curing. Keep slabs moist and above 50°F for at least 7 days using wet burlap, plastic sheeting, or a curing compound to achieve full design strength.
✅ Portland vs. Eugene vs. Bend — Pricing Snapshot
Portland metro is Oregon’s largest market at $148–$172/yd with CalPortland, Central Concrete, and Knife River all competing. Eugene averages $145–$168/yd with a strong local supplier base. Bend and central Oregon run $158–$192/yd — significantly higher due to the Cascade Mountain delivery geography and fewer local batch plants serving the high desert.
Oregon Concrete Calculator — Frequently Asked Questions
How much does concrete cost per yard in Oregon?+
$142–$178 per cubic yard for standard ready-mix in Oregon. Portland and Eugene are most affordable at $142–$168/yd. Bend and rural central Oregon run $158–$192/yd. Short-load fees of $125–$225 apply for orders under 3–5 cubic yards at most Oregon plants.
What PSI concrete should I use in Oregon?+
3,500 PSI for standard western Oregon residential outdoor flatwork (driveways, patios, sidewalks). 4,000 PSI with 3.5–6% air entrainment for all eastern Oregon outdoor work. 4,000–4,500 PSI for retaining walls and structural foundations statewide.
How deep must footings be in Oregon?+
12 inches minimum in western Oregon (Portland, Eugene, Salem) where frost depths are shallow. Up to 24 inches in eastern Oregon (Bend, La Grande, Baker City) where winter freezes are deeper. Always confirm with your local Oregon building department, as frost depth varies significantly by elevation and location.
Do I need a permit for concrete work in Oregon?+
Yes for structural and retaining work. Oregon requires permits for foundations, retaining walls over 4 ft, structural slabs, and driveway aprons at public roads. Simple patios and walkways on private property typically don’t need a permit — confirm with your local Oregon city or county building department.
How much concrete for an Oregon driveway?+
A standard 10×20 ft Oregon driveway at 5 in. needs ~3.4 cubic yards with 10% waste. At Oregon pricing of $150–$168/yd (3,500 PSI), material costs $510–$571. Total installed cost including labor typically runs $1,900–$3,400 in Portland and Eugene metro areas.
Who supplies ready-mix concrete in Oregon?+
Major Oregon suppliers include CalPortland, Central Concrete Supply, Knife River Materials, and Baker Rock. Portland metro has the most plant options for same-day scheduling. Bend and eastern Oregon suppliers typically require 24–48 hrs advance notice. Always request a batch ticket confirming PSI, air content, and slump.
Can I pour concrete in winter in Oregon?+
Western Oregon (Portland, Eugene): possible in mild winter windows but risky due to rain. Avoid pouring when rain is forecast within 24 hours. Eastern Oregon: avoid pours below 40°F without heated enclosures and insulated blankets. Most Oregon contractors pause outdoor structural pours from November through February.
Related State Concrete Calculators
Washington Concrete Calculator
Cubic yards, bags & WA ready-mix cost
California Concrete Calculator
Cubic yards, bags & CA ready-mix cost
Idaho Concrete Calculator
Cubic yards, bags & ID ready-mix cost
Nevada Concrete Calculator
Cubic yards, bags & NV ready-mix cost
Official Oregon Concrete Resources
OSSC, ORSC, ODOT, and industry references for compliant concrete work across Oregon.
🏛️
Oregon Building Codes Division
Building Codes & Permits
Access Oregon Structural Specialty Code (OSSC) and Residential Specialty Code (ORSC) requirements, apply for structural concrete permits, and find licensed contractors for compliant foundation, retaining wall, and flatwork projects statewide.
Visit OR Building Codes Division
🛤️
Oregon Department of Transportation
ODOT Standards
Access ODOT standard specifications for concrete construction, driveway access permits, and concrete standards for road-adjacent and public right-of-way projects across Oregon including hillside and high-rainfall area requirements.
National Ready Mixed Concrete Assoc.
Industry Resource
Find NRMCA-certified ready-mix producers in Oregon, access ACI 318 mix design guides, and get expert recommendations for wet-weather pours, eastern Oregon freeze-thaw mixes, and seismic-compliant structural concrete for OR projects.